THIS TMA WILL BE MARKED USING THE STANDARD DIPLOMA GRADE MARKING RUBRIC DETAILED IN THE ACADEMIC COURSE HANDBOOK. REVIEW THE RUBRIC TO SEE THE MARKING CRITERIA TO UNDERSTAND WHAT IS EXPECTED OF YOUR SUBMISSION. THE MARKER WILL USE THIS TO DETERMINE YOUR GRADE.
Consider an oil tanker of 180m LOA, built in 2020, which is loading from the ballast condition to the fully loaded condition, in an area of still water and moored to a quay. The vessel then undertakes a transatlantic voyage from Stockholm to Jacksonville (USA), in the Winter North Atlantic (WNA) area during which time it first passes through a regular sea pattern with significant wave height of 1.2m and wavelength of 20m.
The vessel then encounters heavy weather mid voyage, with a confused sea state and wave heights of up to 5.0m.
Upon arrival at the destination port the vessel again enters still water and fully discharges, this time using an SBM, and returning to the ballast condition.
Discuss the stresses, loads and forces acting on the ship structure at each of the above mentioned phases of the voyage and how these are induced.
The officers and crew of the vessel place great trust in the design and construction of the vessel and the people involved in this. Discuss how the naval architect in the modern era can verify the ships design as being fit for purpose.
Upon arrival in Jacksonville the Classification Society arrive on board to confirm that the arrangement and design of the double bottom tanks within the cargo length comply with statutory requirements. This follows a concern being raised by Port State Control who believe that some dimensions do not meet with the relevant regulations. Explain which regulations are applicable and the requirements of this / these.
You must include a suitable introduction and conclusion to your guide, have a structure of headings and subheading, and ensure all the sources and references you use are properly acknowledged.
NOTE: The word length for this assignment is 2000 words (+/- 10%). This excludes the contents page, contents list, references/bibliography list and any annex/appendices.
